A guide to our on-site hydraulic repair services

Any business that owns or operates hydraulic equipment will understand that typically, emergency repairs come as part of the territory.

Whilst hydraulic machinery and components are designed to be robust and able to withstand some of the most extreme conditions, the nature of the job they are performing means that they are also prone to faults and breakdowns.

Operating under considerable pressure for prolonged periods of time can have an impact on even the most durable hoses, power packs, valves and so on. Even with the most stringent service and maintenance procedures, you must be prepared for unexpected failures in the system.

Naturally, the best way to stay ready is to have the contact of a skilled hydraulic engineer on hand – such as Derek Lane & Co, for example.

Here at Derek Lane & Co, we understand how critical it is that your hydraulic machinery gets back up and running as soon as possible. With our on-site hydraulic repair services, that’s what we endeavour to do.

On-site hydraulic repair services

When you need a repair or replacement, we understand that time is of the essence. Our on-site services remove the hassle of sending away parts and waiting for a solution.

Machinery downtime means loss of earnings, which can be considerably reduced with access to on-site support.

Derek Lane & Co are a team of highly skilled hydraulic engineers and technicians, with the capability of servicing and repairing all types of fluid power equipment on-site.

Some of our on-site repair services include:

Hydraulic cylinder repair

We know all too well how critical hydraulic cylinders are to your productivity and operations. A faulty or damaged hydraulic cylinder requires attention as soon as possible to minimise system downtime and health & safety implications.

Hydraulic cylinders or the components within them may crack, leak or rust – any of these warning signs means you have a problem on your hands. If you suspect either of these issues, we can help.

We can inspect, assess and repair or refurbish most types of cylinder, whether that’s a small workshop ram or a large industrial set-up. Our service starts with a speedy but thorough troubleshooting process on-site, in which we will determine whether a full-scope rebuild or repair solution is required.

We have the tools and parts needed to offer full-service rebuilds and repairs of specialised hydraulic cylinders. Either way, we’ll make sure it’s the most cost-effective solution for you.

Control valve repair

If you’ve ever experienced a control valve failure, you’ll understand just how critical these components are in keeping your hydraulic system operating efficiently. Without a properly functioning valve, you’ll find yourself in hot water.

There are many reasons why a control valve may malfunction, and this can lead to a number of different problems such as internal or external leaking, changes in pressure, a sticking valve or even complete failure.

In most cases, a control valve repair is going to be the most cost-effective solution to a replacement. However, there are many different types of valves and they vary in complexity. With this in mind, seeking the help of a qualified hydraulic technician is crucial.

As experienced manufacturers of bespoke hydraulic control valves, our team are fully versed in this area and equipped with the tools for the job. We can offer quick and efficient testing, troubleshooting and repairs of even the most complex control valves.

As we house many different types of control valve replacement parts, we can offer a solution on the spot to get your operations back up and running as soon as possible. Rest assured, we perform rigorous diagnostic tests on all valves before issuing a full test certificate to ensure they’re fit for purpose.

Hydraulic power pack repair

It goes without saying that when your machinery relies on the energy generated by a hydraulic power pack and it fails, you can’t afford to wait around.

Hydraulic power packs are incredibly complex components, and there are an infinite number of contributing factors that could lead to issues or a complete shutdown. Whether you’re experiencing an oil leak, pressure fluctuation or overheating, calling in a hydraulic power pack repair swiftly is a priority.

It takes an expert to correctly diagnose a hydraulic power pack failure and devise an effective solution. As specialists in custom power pack builds, it’s safe to say that we know these units from the inside out.

No matter the size or complexity of your unit, we can carry out extensive testing, troubleshooting and repairs of all power packs. We have the unique advantage of being able to source hydraulic parts from major manufacturers across the globe, so no repair is too far out of reach.

On-site hydraulic service & maintenance

Of course, the best way to prevent breakdowns in the first place, is with regular service and preventative maintenance on your hydraulic equipment. In the same way that you would take your car to a garage for an MOT, this is usually best left to an expert.

We offer professional on-site servicing and maintenance for all hydraulic systems and components to keep your equipment running smoothly. We can devise regular service schedules for any hydraulic machinery and components, in which our skilled technicians will visit you on-site to assess your set-up with minimal disruption to your operations.

A strategic maintenance schedule can help to prevent costly repairs for the most part. Although there may be times where this is unavoidable and in which case, we’re here for your emergency repairs, too.

Our technical & engineering expertise

Derek Lane & Co are your go-to specialists when it comes to fixing your hydraulics. We’re a team of highly skilled hydraulic engineers and technicians who have been a proud leading partner in fluid power solutions for almost four decades.

We support a wide range of sectors within the industrial, construction, manufacturing and marine & defence sectors offering end-to-end servicing, repair and maintenance services, alongside custom builds.

We understand the urgency of hydraulic repairs and we pride ourselves on our quick response and competitive turnaround times, with an emphasis on complete customer satisfaction.

Our immediate service area covers Southern England, but our resources can be made available UK-wide where required.

As a member of the Fluid Power Group, we have direct access to over 250 fluid power brands. This means that we can source the exact products needed for your repair or replacement often with next-day delivery – and that’s what sets us apart from the rest.

So if you’re looking for a hydraulic repair in Devon, Somerset, Cornwall or further afield, don’t hesitate to get in touch with us or keep our phone number handy (01626 831400) for those emergency call-outs.